UltraMix® White Ink

UltraMix® White is part of 19 non-phthalate, high performance colors, formulated for ultra high speed wet-on-wet automatic printing.

Mixing them to create special or standard colors by using the UltraMix®, Pantone® color matching software delivers inks well suited for fine detail and halftone printing, using the finer mesh counts.

The 7500 Series inks spot dry, with a very low after flash tack. Dwell time is of course dependent on the spot dryer used. You may find that a lower heat during spot curing avoids too much heat actually make the ink tacky, plus saves you both wasted time and electricity costs.. Spot drying only partially fuses or gells the surface of the ink. The ink should be just dry to the touch, with no lift-off, but not totally fused. Total fusing any flashed color may cause inter-coat adhesion problems with the inks to be printed on top of the flashed ink. Final fusing or curing should occurs at the end of ink application, in the dryer.